Check out some similar questions!
Where to find rheem imperial 80 plus furnace blower
[ 1 Answers ]
My furnace blower seems imbalanced when it runs. You can hear noise coming out of where the blower is. I removed the blower and it looks out of shape at a few points.
How do I find a source for replacement furnace draft inducer for rheem criterion II
[ 2 Answers ]
I have A Rheem Criterion II Model RGLH-10EBRJR and I've been told I need to replace the draft inducer because of hairline cracks in the plastic housing. I looked at Rheem web site and no help there. How/where can I find a replacement part? Estimate from repairman was in excess of $400 for part...
Rheem Criterion II blower works but no flame
[ 7 Answers ]
My furnace blower starts runs for a few minutes and then stops. The two green LEDs are on-the amber one is not. The igniter does not get hot. Dead igniter? Thanks
Rheem Criterion II - blower works OK with heat or AC, not by itself
[ 1 Answers ]
The problem appears to be in the internal wiring or control board. Symptom: If I temporarily connect the red low voltage control wire from the transformer to the green control wire for the fan, a relay clicks on the control board. But the blower does not come on. I have tried re-seating...
Rheem Criterion II blower won't stop
[ 4 Answers ]
I have a Rheem furnace and the low speed fan continues to stay on after the furnace has cycled off. When I disconnect the red wire (low speed wire), the furnace runs normally. I would imagine the switch for the low speed is open. Is the switch controlled by the IFC? Does the IFC need to be... View more questions Search
Add your answer here.
|