Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
MTD Electric Lawn Mower Switch wiring?
[ 3 Answers ]
Hi all, I have a MTD Model # 185-387-129 electric lawn mower... The wires going from the power switch to the motor became unattached. The switch has 6 terminals, two rows of three. A black wire that is attached to the external socket is attached to the top? Left terminal. The wire that...
MTD sit on lawn mower
[ 0 Answers ]
Hello I have a MTD Silvertrac sit on Mower, I cannot turn to the left, it only steers to the right, when I try to turn left I get a clicking noise, I have checked the steering shaft and cogs all seems to be OK, Can anyone advise.
Mtd lawn mower troubleshooting
[ 1 Answers ]
I have a MTD lawn tractor with a 16.5 HP briggs. I stopped dead while mowing. It has spark, I replaced the in line fuel filter. It will start with starting fluid, so I believe it's a fuel problem. I took the fuel line off and tried to blow into the carb but I couldn't blow, it was solid so I took...
MTD Lawn Mower
[ 1 Answers ]
Mower won't start; I've tried jumping the solenoid & all I get is spark, it still won't start. The battery is new. Thx!
Mtd riding lawn mower
[ 3 Answers ]
Hi every one I have a very old mtd riding lawn mower that my mother gave me but it keeps throwing the drive belt. My mother thinks that the way she was putting the belt on is wrong does any one know how the belt should go on its about a 1986 model mower. View more questions Search
|