 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Furnace model Rheem RGFD-09EZCMB
Furnace model Rheem RGFD-09EZCMB (installed 2001)
2010 - noticed code "66" flashing intermittently - furnace seemed to work OK even with his code July 2013 - noticed code "68" - noticed burning smell in ducts while A/C running. - furnace fan still running - turned off A/C - turned on A/C, noticed code "67" - fan would not turn on. Motor is: Rheem p/n: 51-242690-03 CCW Is this a bad motor problem or other problem (capacitor, circuit board, etc) |
||||
Check out some similar questions!
Need to purchase a new thermocouple - but need the right part. How do I locate that part number?
I have an old Rheem furnace model number RGAA-100A, and the pilot is lit but it only goes on for a minute and than shuts off. I cleaned the filt but that didn't help. Please advise!
My furnace starts up and shuts down, we replaced the thermostat thinking it was that. My husband said it looks like its not inginting the flame. You can hear the blower blowing cold air nothing more. Please help this unit I believe is 6 -7 years old.
I am trying to get info on my rheem furnace filter. I can not locate it and believe it might be missing. The front panel says it it a permanent type filter. Can you tell me the size filter I need to replace it as well as where it's located? The model # is RCBA- 3765AS17. Thank you!
I have a RHEEM Gas Furnace Model 3214-100FB. My problem is that when the heat shuts off the fan keeps moving until all the hot air is removed from the vents. The fan then continues to blow until the house becomes cool again, which then causes the heat to have to come back on. What are the proper...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
