Ask Experts Questions for FREE Help !
Ask
    kantelmi's Avatar
    kantelmi Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 4, 2013, 01:16 AM
    Goodman 3 wire to 3 wire condenser unit
    I have a phkj060-if model goodman ac - I bought a new fan motor and the wires are black, purple and brown. I already took off the old fan with the same color wires. However, I can't remember the wires attached to the unit I labeled A,B,C and returned my motor and can't match my wires up. The wires attached to the unit is black, white and I think cream. The sun has faded them. What wires do I match up with my purple black and brown?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
     
    #2

    Jul 4, 2013, 06:25 PM
    If you are talking about the condenser fan motor, the wiring is as follows:

    Brown goes to the 'fan' terminal on the capacitor. Black goes to terminal 'T-1' on the contactor. Purple goes to terminal 'DF-1' on the high voltage defrost relay.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Condenser Fan Motor Old 3-wire to New 4-wire Help Needed [ 2 Answers ]

Hello, I have an A.O. Smith Condenser Motor and told this was the correct replacement. The old motor is 3-wire and the new motor is 4-wire. I have attached images. Can someone please explain which wires on the new motor go to the old connections. This is an image of the Wiring Schematic on the...

I need to know how to wire t-stat to condenser unit if colors are yellow red green an [ 0 Answers ]

How to wire my condenser unit contactor for t-stat wires if clors are green yellow white and red

Replacing a Rheem 5 wire condenser fan motor with an Emerson 4 wire condenser Fan [ 0 Answers ]

I have a Rheem a/c unit that the fan motor quit. I took all the information off the old motor and went to a local supply store and they cross-referenced the numbers and gave me and Emerson motor. All the specs are the same, 1/5 HP, 1075 RPM, 60 Hz, 1.3 Amp, single phase. When I got home, I took...

Replacing AC condenser's 40A 240v power wire from main to the unit [ 4 Answers ]

I am in the process of replacing our AC condenser's wires which powers the outside unit From main breaker. The existing 25+ years old wore out and damaged wire is romex 8/3 with ground on a 40A 240v dual-breaker. The AC guys when installed the unit, Connected the BLACK and RED to the 40A...

Low voltage wire for Goodman air condenser [ 1 Answers ]

I have three low voltage wires going to the condenser. Two were pulled out red and black, the third (white or clear coloring) is attached to a red pig tail coming from the controller. A second pigtail from the controller had nothing on it and looks like has never been used although the wire was...


View more questions Search