 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
None of the buttons worked. I would open and shut the door a few times and the panel lights would come on and I could use the dryer. Now nothing comes on. What are the two prongs on the dryer opening? They fit into two slots on the dryer door.
Control panel goes on and off with different settings going off and on . Sometimes works most times not. Dries good when does come on
I took the lint trap apart to clean it there were two wires attached from dryer to lint trap they fell inside the dryer I am unable to reach them easily are they important? What r they used for? Everything seems to be working all right
I have a Kenmore Elite smartheat quiet pak dryer. Model # 110.85866400. The problem is when I push the start button it beeps 3 times and the display flashes PF... and does not start..?. We have replaced the control board and still... NOTHING!. If anyone could help me... I would greatly appreciate...
My Kenmore dryer turns itself off after less than 5 minutes of run time. It doesn't matter which cycle I have selected, I have tried unplugging it and then plugging it back in after waiting as much as an hour. Nothing seems to help. Any ideas?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
