Ask Experts Questions for FREE Help !
Ask
    crossbow1's Avatar
    crossbow1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 27, 2013, 01:35 PM
    Briggs&stratton 14hpomv model294400
    Can you show me illustated parts seals etc
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 29, 2013, 10:58 PM
    Hi,
    Take the link below for a copy:http://www.m-and-d.com/pdfs/briggs/2...s9828-1104.pdf
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

19.5 IC Briggs & Stratton [ 7 Answers ]

Won't turn over, removed pistons and it turns over, removed both compression rings and it still turned over. With the rings in the motor will not turn over. Can anyone help? I'm out of ideas.

Briggs & Stratton 16.5 [ 4 Answers ]

I have a MTD Mower OHV 16.5 B&S engine, Has New Battery , solenoid, starter, and valves have been set to .004 on intake .006 on exhaust. Will start and run till I shut it off and will not start again. It si only four years old. Any thoughts?

18.5 hp briggs*& stratton [ 1 Answers ]

Does anybody know can anybody tell me how much oil this engin should take ? Thanks skippy

Briggs &stratton 15 hp. [ 1 Answers ]

The other day this engine just quit and I had no spark from the coil. It has the electronic ignition so I cleaned everything under the flywheel and put it back thinking that this must be the problem but no. There is a small wire that goes to the coil and when I pull it off it will fire. I found two...

View more questions Search