Ask Experts Questions for FREE Help !
Ask
    240nodogs's Avatar
    240nodogs Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 25, 2013, 03:45 PM
    Kenmore Elite Washer Troubleshooting
    I have a Kenmore Elite Washer that I neen to remove the tub in order to remove something metal(coins?) from beneath the tub. Need to remove the top and have removed the rear clips but front won't release. How can I take the top off so as to lift out tub?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jul 8, 2013, 09:49 AM
    Take a putty knife and press in on the clips on each side of front and it will release them so you can raise the top.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Washer Troubleshooting [ 1 Answers ]

How do u fix the basket if its off balance

Kenmore elite washer troubleshooting [ 2 Answers ]

My Kenmore Elite washing machine will fill up with water, but will not start washing or agitating. I've unplugged it and plugged it back in. There is power to the outlet. I've also closed the lid real hard, and it still won't start.

Kenmore elite washer troubleshooting? [ 1 Answers ]

My washer flashes a code 35 then stops working for 20 min

Kenmore elite washer troubleshooting [ 1 Answers ]

Hello I have a kenmore elite washer that will go thrue I wash cycle and when it is time to spin it will set a errer code fh, after resetting you can hear water entering for several minutes until it resets the same code, could this be a pressure switch problem.

Kenmore washer H3 elite troubleshooting [ 0 Answers ]

H3 elite kenmore front loader washer flashing f,h during rinse/drain cycle?

View more questions Search