Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Kenmore modelo 90
[ 0 Answers ]
No encuentro el filtro de la maquina. No funciona.
Cutting off electricity to wire an intermatic t104
[ 2 Answers ]
I can't find the circuit breaker switch to cut the electricity to my intermatic T10004rt1 so that I can replace the timer model T104. There is no circuit breaker for it on my house panel so I assume that there is one on the T10004rt1 but I don't know where it is. How do I cut the electricity to...
Wiring an Intermatic T104 timer to operate high- low speed
[ 6 Answers ]
I have a koi pond that moves the water with a Hayward Super 2 pump and a 2 hp. A.O.Smith 220v motor. I replaced the T104 timer, which I wired to be lowspeed/ high speed mode instead of on/off, as the Koi need constant water flow. Problem is this: I disconnected the wiring thinking it was a wiring...
Separate Fan light switch, fan switch and switch for can lights to one location
[ 2 Answers ]
I have A circuit that has 6 can lights and a fan light. The power is at the switch box I need to know how to wire the separate switches for the cans,and the light on the fan, and fan (That would be in a three gang switch box.) to one location.
Intermatic T104 wiring (simple terms)
[ 2 Answers ]
I am trying to wire an Intematic timer model #T104 to my pool pump. I have a black wire, a red wire, and a green (ground) wire. To my pump, I have a black, red and green wire. To my salt converter, I have a black, pink and green wire. In simple terms (please), which wires do I connect to... View more questions Search
|