Hampton bay universal Video fan remote

mc10306 Posts: 1, Reputation: 1

New Member

Mar 24, 2007, 03:56 PM

Hampton bay universal Video fan remote

I need a code for magnavox TV dvd vcr combo model 27mdtr20/17

ceilingfanrepair Posts: 5,733, Reputation: 109

Uber Member

Mar 26, 2007, 04:23 PM

YOu need to codes for the remote, or for the fan? THe remote should include instructions.

Add your answer here.

Check out some similar questions!

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Hampton Bay Fan Light/Fan Remote Problem [ 16 Answers ]

Hello, we have a Hampton Bay fan and my son dropped the remote and it stopped working. I changed the batteries and that didn't work. Now I asked someone at Home Depot what I needed to do. They instructed me to buy a new remote kit... I did however it came with a little grey box with 3 cords...

Hampton Bay Remote Video/fan Remote Control [ 16 Answers ]

I have a Hampton Bay Video & Fan Remote Control (Model #UR8050T). It has been working fine for about 2 years until it recently began malfunctioning. It still operates the television, but the use of the fan/light features has stopped working. It will not turn the fan on or off, and the light is...

Hampton Bay Ceiling Fan & PDA's universal remote [ 1 Answers ]

Hello, I own a HP PDA (rx3115) and a hampton bay light/fan. The PDA comes with infrared, and one of the functions I use it for is a replacement for all of my remotes. Anyway, the device code for the fan isn't listed in the choises that the PDA comes with. I was wondering if it is possible to...

Remote on Hampton Bay fan [ 1 Answers ]

The control on my Hampton Bay fan is not working properly. I have changed the batteries, but this is not the problem. If I buy a new remote, how can I make it compatible with this fan? Any hints?