Ask Experts Questions for FREE Help !
Ask
    searealm's Avatar
    searealm Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 23, 2013, 04:59 PM
    Fluid Dynamics- water
    Is it possible to keep a metal ball that is enclosed inside a circular water filled tube circling the tube by means of a small attached inlet and outlet tube attached to a water pump for continued pressure ?
    ebaines's Avatar
    ebaines Posts: 12,131, Reputation: 1307
    Expert
     
    #2

    Jun 24, 2013, 05:45 AM
    You could aramnge the inlet and outlet so that they cause the water to rotate inside the tube. Since the metal ball will sink to the bottom of the tube you could place the inlet tube near the bottom oriented to shoot water tangentially to the tube wall so as to push the ball, and the outlet near the top, above the top of the ball.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My dad has fluid in his elbow. Is it dangerous? And is it a fluid filled bursa? [ 2 Answers ]

My dad was diagnoes with elbow bursitis and he woke up this morning and he said his elbow looked like a sack of water. Is it dangerous? And is it the fluid filled bursa?

Fluid dynamics; Continuity or Bernoulli's equation [ 0 Answers ]

A large artery (radius r1) branches into three smaller arteries of equal radii r2. The branching occurs in such a way that the average flow speed of the blood is the same in each of the smaller arteries as in the larger one. For this to occur, what must be the value of r2 relative to r1

Fluid dynamics [ 3 Answers ]

I have the following part to a problem that I am struggling with. (see diagram attachment) The water tank has a nozzle with an unknown diameter at a depth of 6.75m. The level of the tank will stay the same depth by being toped up. What I am struggling with is calculating what diameter the...


View more questions Search