Ask Experts Questions for FREE Help !
Ask
    brianbeme's Avatar
    brianbeme Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 23, 2013, 06:57 AM
    murray riding mower 405000x8f
    My mower starts up perfect every time and if you don't push up the throttle it will idle fine,but when you push up the throttle to give it more gas it starts running bad.I tried to mow with it and when you turn the blades on it gets even worse.What could it be?
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Jun 23, 2013, 04:54 PM
    Check your choke control.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

murray select 405000x8f [ 1 Answers ]

Mower won't start, see no spark and plug is wet with fuel. Cleaned the plug and sanded the contact points but it didn't help. Not sure of the next step.

Murray 405000X8F belt assembly [ 2 Answers ]

The belt that drives the blade came off on my Murray 405000X8F came off. Does anyone know how the belt should be threaded?

Mower Replacement Belt, Old Murray Riding Mower [ 2 Answers ]

I have a model 38618X92E. I am looking for a manual or parts catalogue for this model so I can find the proper replacement belt. Thanks.

Murray select model 405000x8f [ 1 Answers ]

Murray select lawn tractor will turn over when I try to start it, but will not start up.

Murray riding mower [ 3 Answers ]

I have a murray riding mower that I have replaced the solinoid and the starting switch but I still get no power to the starter. I can hot wire the starter and it will crank so there must be a problem somewher in the wires??

View more questions Search