Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Snowblower starts but when starting to plow snow it stalls out
[ 2 Answers ]
I have a craftsman 5/22 blower. I installed a new plug in the fall. I filled up the gas tank, started it and started to plow, but it keeps stalling out when rotor and wheels are activated. It runs good when sitting at an idle. Why?
1988 honda accord lx stalls while starting in am (after eleven hours of sitting)
[ 2 Answers ]
My 1988 Honda accord lx will start catch stall a few times while trying to start it in the morning after sitting for over eleven hours less time it is fine more time it is worse I replaced distributor cap (some oil inside) plugs engine compartment fuel filter too
1998 Honda Accord not start and/or stalls after starting
[ 2 Answers ]
I have a 1998 Honda Accord EX V6 3.0L with 210,000 miles on it. At around 125,000 miles it started having the same problem that several people have asked about. It doesn't want to start after it has been sitting in the sun with temperatures being above 85 degrees. It's fine if the temps are the...
Car stalls while driving, and has trouble starting after gassing up.
[ 1 Answers ]
I have a 2003 Hyundai Accent with about 200k on it. It's a standard. I recently replaced the spark plugs, and it runs well for the most part. The last year or so I've been having problems with starting it after I gas up. It doesn't matter how much gas I put in, what kind of gas I use, or if I add...
John Deere LT166 after starting stalls when letting our brake
[ 1 Answers ]
My summary is what the issue is. For a few day the reverse could be activated without pushing in on the reverse switch. Now I can start the machine but when I try to let out the clutch-brake pedal it stops running. I believe the PTO switch is good as well as the brake-clutch switch. The reverse... View more questions Search
|