Ask Experts Questions for FREE Help !
Ask
    wy203's Avatar
    wy203 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 20, 2013, 05:17 PM
    Panasonic CRT TV switch faults
    I have a Panasonic CRT TV, when switch it on, no picture and sound, but the red power on indicator light flushing, occasionally when switched on, it try to start but within a few seconds there are two clicking sounds then no picture and sound, the red power indicator light start flushing. Any tips for repairing this fault are highly appreciated.

    Wendy
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Jun 20, 2013, 05:30 PM
    Carry to the Repair shop... pay the bill.

    Seriously... if you aren't an electronic Technician with the right test gear and service manual... this is not something you will be able to do.
    smkanand's Avatar
    smkanand Posts: 602, Reputation: 56
    Senior Member
    		  
    #3

    Jun 20, 2013, 09:53 PM
    Same thing happening with my crt sharp TV but it start now. I think take it to technician.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No picture, no sound. Panasonic crt TV. 40" purchased yr. 2001 [ 0 Answers ]

I hear a relay click once softly when first plugging in power cord, when pushing power on, or when using remote to power on. At first when powering on I would get a distorted, flip-flopping picture, but after a few weeks of that it wouldn't come on. Just a soft click now, no pic no sound. Is it...

Panasonic TV faults [ 0 Answers ]

I have a Panasonic 37" TV model TH-37PX600B which is 4 years old. It has started displaying a very thin green vertical line down the middle of the screen when using TV, WII etc. I have tried the usual easy things like powering off and restarting etc but it is still there. Help please

I have a Panasonic evo54 (CRT) there is no on/off and fuse is good [ 1 Answers ]

I have a Panasonic evo54 (CRT). When I push the on/off button nothing happens. No noise, no power, no picture. I checked the power supply section of the board every is still in tact, even the fuse is OK. Kindly help out.

Panasonic tau crt problem? [ 0 Answers ]

Hi, I have a Panasonic Tau, the problem I keep having is that the Action Menu continually appears without the action button being pressed. Has this happened to anybody else? Sometimes the buttons don't function properly either. Any ideas would be appreciated. Thank You

View more questions Search