Ask Experts Questions for FREE Help !
Ask
    Dschirico's Avatar
    Dschirico Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 19, 2013, 07:26 PM
    Drive belt problem
    There is a clicking noise where the belt goes into the primary/trans. When I roll the bike or if I grab the belt and move it forward and back, there is play in the front of the belt The bottom part of the belt has about 1-1/4"play up and down but I don't feel like that is the fault.
    Dschirico's Avatar
    Dschirico Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jun 19, 2013, 07:27 PM
    There is a clicking noise where the belt goes into the primary/trans. When I roll the bike or if I grab the belt and move it forward and back, there is play in the front of the belt The bottom part of the belt has about 1-1/4"play up and down but I don't feel like that is the fault.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to change the drive belt and tensioner belt MTD Yardman [ 1 Answers ]

I would like to know the steps to change the drive belt and tensioner belt on a 38" 13.5hp MTD Yard Machine.

Troy bilt 18 hp riding mower uppper drive belt and transimisson belt replacement [ 0 Answers ]

I replaced the drive belt and transmisson belt and the clutch/brake pedal will not work when the mower is in forward. The mower will move forward when idling without pressing on drive pedal. Anyone know what it could be?

Drive belt 46576x92 murray 17.5 hp I can't figure out how the dive belt [ 1 Answers ]

having trouble with the drive belt on a murray rider model 46576x92 17.5hp I can't figure out by the tear down diagram thank you bigpoppy52

Drive belt drive diagram [ 1 Answers ]

Where can I find a diagram of the belt drive for mtd 18hp. 42" riding mower for free.

View more questions Search