Ask Experts Questions for FREE Help !
Ask
    jerrykknight's Avatar
    jerrykknight Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 17, 2013, 03:41 PM
    Craftsman 917.289244 rattles with clutch out
    21HP, 46" model 917.289244 started to rattle loudly during a mowing session recently. The rattling stops when the brake is depressed. I can find no missing parts. The rattling returns as soon as the brake pedal is released
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jun 17, 2013, 06:58 PM
    Hi,
    I would say you either have a chunk out of the belt or a flat spot on the flat idler in the drive system. Please see attached for pictures from http://www.SearsPartsDirect.com and Managing your life just got easier | ManageMyLife using you furnished model number.
    Peace,
    Clarke
    Attached Images
       
    jerrykknight's Avatar
    jerrykknight Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jun 22, 2013, 03:16 PM
    Thanks, Clarke. Turns out a small twig was wedged into the centerspan idler. Removed and back in business. Thanks again
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman lawn tractor, model 917.289244 [ 1 Answers ]

Tractor starts and runs fine for about half hour and then it stalls out. I disengage blades , put it neutral, press the clutch down and it starts right up and runs for about 5 to 8 minutes then stalls out again. This process repeats over and over till I finish mowing. Please HELP!!

Craftsman 917.272751 [ 14 Answers ]

I have a Craftsman 917.272751 Briggs 18 OHV Intek Plus. I have it for 10 years with no problems. This year I got 2 weekend grass cuttings in until the third cutting I was 45 minutes into the 2 hour event when the tractor sputtered, ran, sputtered, ran, sputtered, like some one took the fuel line...

Craftsman tractor 917.259830 [ 1 Answers ]

The idler (PTO) for the deck will not fully disinguage so the safety switch is not made so the tractor will not start once it is shut off. I cannot see why it is hanging up. If I reach under the tractor and pull on the deck belt strongly ( engine shut off) it will release, but it is...

How do I remove clutch locator from Craftsman LT1750 917.2722200 ? [ 1 Answers ]

Either the clutch locator (key # 23 in the image in the Owner's Manual) on this mower was mounted improperly or the manual instructions are incomplete. On this mower, the flange of the locator was mounted on the INSIDE of the mower frame. (This seems to be correct, but I'm not sure.) I...

Craftsman 917.256524 [ 1 Answers ]

I was just given a lawn tractor- the previous owner says the drive starter is shot. Is this a common problem and how do I replace it?

View more questions Search