Ask Experts Questions for FREE Help !
Ask
    sherrir's Avatar
    sherrir Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 15, 2013, 04:14 PM
    Uc7051r remote question
    I have a fan/light combo. The unit will not turn on with the light switch. Only the remote. Is there a way to bypass remote so light will turn on with switch?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Jun 15, 2013, 04:42 PM
    Sure, you may need an extra switch lead, The lights wire usually goes straight up through the center of the pipe and connect to the receiver, cut the wire, cap the unused end, and connect the lights wire to your switched wire.
    Remove the light kit and verify you are for sure on the Lights wire, usually blue or black/white.
    Good Luck

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan/light model #uc7051r [ 3 Answers ]

We just got a hampton bay ceiling fan/light that is used. The fan works, the romote works, but the lights do not. Model # Uc7051R. We've been everywhere, with no help. We love the fan. We think its control module, but the romote works on our fan it the front room. The codes are correct for...

UC7051R receiver for Hampton bay ceiling fan-- directions for replacing it [ 0 Answers ]

I need directions to replace the receiver.

Can I bypass a uc7051r receiver [ 1 Answers ]

I have a hampton bay fan with remote. I think the receiver is bad. I went to the Home depot and they sold me a remote/rec. combo.can I bypass the uc7051r receiver and use this? If not does anyone have a wiring diagram for this receiver so I can try myself?

Hampton bay fan part model uc7051r [ 2 Answers ]

Fan does not work motor above the lights is melted on one side Model UC7051R SN#9905-099596 where and how much can I get this part. This a Hampton Bay Fan.


View more questions Search