Ask Experts Questions for FREE Help !
Ask
    bigdog84's Avatar
    bigdog84 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 14, 2013, 11:15 AM
    My furnace fan starts, then stops
    I put a new blower motor in my furnace the blower comes on the stop what can I do too get to work



    Thank you
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jun 14, 2013, 12:27 PM
    Why did you replace it? Was the old one doing the same thing?
    bigdog84's Avatar
    bigdog84 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jun 14, 2013, 12:39 PM
    The old one would not start
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #4

    Jun 14, 2013, 05:25 PM
    Did you replace the capacitor when you did the motor? If not, do so.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Payne 394gaw furnace - main gas starts/stops/starts/stops [ 0 Answers ]

I have a Payne 394gaw furnace. The house thermostat calls for heat, the igniter assembly sparks and lights fine. (problem 1): It takes about three minutes for the thermocouple in the igniter assembly to close (problem 2): The main gas starts, runs for about 10 seconds, then stops, then...

Fan motor starts for a second then stops [ 0 Answers ]

Goodman heat pump, fan motor starts for a second then stops about 10 seconds it tries again.

Gas furnace -thermo clicks a buzzing starts.Gas flame starts for 10 secs & stops [ 0 Answers ]

I have an old Sears Power Miser Natural gas furnace. It doesn't always come on, but when it does the thermostat clicks and a buzzing starts. You can hear the gas flame start and then 10 seconds later it shuts off. If I turn the fan on manually (before the 10 seconds is up) the flame remains burning...

Goodman furnace problems when running the ac it starts stops starts stops [ 1 Answers ]

I have a goodman furnace 98% efficient it works fine on heat but when I run the ac unit it will run fine for an hour or three but then it will start stoping and starting the blower motor I have changed the transformer the blower motor the door switch anyone have any idea why it does this any help...

Furnace Starts, Stops, then Starts again. [ 16 Answers ]

Hello. I have a furnace that I can hear the following steps: 1. thermostat clicks to turn on furnace 2. the furnace immediately turns on the exhaust fan 3. then I hear a click, and the burner is burning, but only for 5 seconds or so and stops. 4. then another click, and another, etc. 5. the...

View more questions Search