Ask Experts Questions for FREE Help !
Ask
    viseth's Avatar
    viseth Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 8, 2013, 05:23 PM
    Craftsman garage door wall controller light is off
    I have a craftman garage door opener that is not working properly. The green light on the wall controller sometimes on and sometime off. When the light is on, I have no problem opening the door. However, when the light is off, I cannot open the door either with the wall controller or the remote controller.
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #2

    Jun 10, 2013, 03:57 AM
    This sounds like a loose connection to me. Check the screws on the back of the opener where all the wires are. If that doesn't help, I would next pull the wall controller off and check the connections there.

    Best of luck,
    WallyH
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Should I frame a wall on outside of garage door, leaving garage door in place? [ 5 Answers ]

I would like to convert the garage into a workroom by putting up a frame on the outside of the garage door, insulating it and leaving the garage door in place so that if I need to sell the house I can convert the room back into a garage. What problems could arise and are there any...

I have a Craftsman 1/2 hp garage door opener and last week the light quit coming on. [ 2 Answers ]

I have chenged the bulb to one I know is working, but to no avail. I have looked over the entire device and can't find a switch that might have been switched. Is there some kind of safety or trip switch that may have been tripped possible during a recent power outtage?

Light on Craftsman Garage Door Open will not turn OFF, when Open. [ 8 Answers ]

I purchase a new Craftsmang ½ hp Garage Door Open and found out in the Problem Section that if I have the door open and cross the safety sensor beams the light will turn ON automaticlly. I hate this feature because my kids constatnly run in and out of the garage door when it is open, so the light...

Craftsman Garage Door Opener light not working after new door installed [ 9 Answers ]

I have a Craftsman Model 139.18054 Garage Door Opener and the light has been working since it was (professionally) installed 7 or so years ago and up to last Monday when I had a new garage door installed. The installer said they did not do any thing to the unit except attach new safety sensors and...

How to build an interior wall inside garage without removing the garage door [ 5 Answers ]

I want to build a wall inside my 1 car garage, I have flooring down already with those 2ftX 2ft squares with plastic on the bottom and click together wood flooring on top. I can't (because of condo docs) remove the garage door.. but I want to make this into a bedroom. Myidea is to seal the garage...

View more questions Search