Ask Experts Questions for FREE Help !
Ask
    Mike22335's Avatar
    Mike22335 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 8, 2013, 11:40 AM
    Sewer trap cap
    I just had a flood in my basement after a very heavy rainfall. The water is coming in where my sewer line comes in the house. The water is clean rainwater the plumber told me and is seeping in through the cement, I can see it bubbling up through the cement in the hole where two 2 sewer trap caps are. The plumber opened one of the caps and the water went all the way down. He told me to buy a cap that can seal the sewer and also can let water drain if it comes in again. He said it is some special cap that won't let the sewer water come in, in case of a backup but will let excess water drain through it. Has anyone ever heard of a cap like this and if so where do I get one?
    KingsX's Avatar
    KingsX Posts: 231, Reputation: 10
    Full Member
     
    #2

    Jun 8, 2013, 12:37 PM
    He could be referring to a back water valve? It's a one way valve that allows water and sewage to travel out, but not back in. They are usuall installed inline on the sewer line. Where I come from they are code on new construction but didn't used to be, so lot of old houses have issues like you described.

    EDIT - if this is indeed what you are after, I have seen them at major reno stores, but I just read your post again, and what I'm thinking is an inline valve, usually installed on the sewer line, under the slab. You would probably want a pro to install. I'm not familiar with one that works as a "cap" on the end of the floor drain. But that doesn't mean they don't exist.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #3

    Jun 8, 2013, 01:02 PM
    Hi Mike

    I'm not sure about a "CAP", but sureseal makes a floor drain seal that can be adapted to this application pretty easily... check out the link at this page:

    Home: SureSeal Waterless Floor Drain Trap Sealer

    You can also check out this video... may give you an idea or two:



    You may need to purchase a threaded reducing adapter (install in plug threads) and then install the sure seal, but it would work for you!

    You could also call the plumber and see exactly what it was he was referring too.

    You may also want to consider installing a sump pump as back up here??

    Back to you...

    Mark
    KingsX's Avatar
    KingsX Posts: 231, Reputation: 10
    Full Member
     
    #4

    Jun 8, 2013, 02:54 PM
    Ya, where I'm from sump pits with pumps and back flow valves are code now, to hopefully prevent any flooding. Rain water is always better than sewage in my opinion I guess if something is going to flood.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sewer clean out cap [ 7 Answers ]

I was looking at my sewer clean out and trying to figure out how to remove the cap. It is not a threaded cap and appears to be a slide on. It looks like this http://cammackranchsupply.com/store/product.php?productid=273 How can I remove this

Sewer trap cap [ 6 Answers ]

Hi, Last week we had a clogged main. The main pipe access is down at the sump pit in the basement and the plumber couldn't open the caps (very old pipe, never opened before). Eventually he just drilled a hole on the cap to get the snake in and cleaned. After that, we just kind of use a plastic...

Sears kenmore furnace - where is the maintenace cap for the condensate trap? [ 0 Answers ]

I'm supposed to pour vinegar in monthly to prevent mold buildup.Gas-fired 95% efficiency model

How do I cap a sewer clean out? [ 13 Answers ]

About 3 months ago I had a break in a sewer line repaired. At the same time they added a curbside clean out access-not sure why because I already have one in the basement... the problem is this: My house is about 30 feet above street level so the pipe has a pretty steep descent to street level....

Cap fell in sewer trap [ 3 Answers ]

my sewer trap has two vertical pipes with two caps,one a little smaller than the other. I recently unclogged the drain by opening both caps. The smaller cap apparently fell into the larger pipe(hole)It is now causing a minor blockage which I have to clear everyday with a piece of wire. I can't see...


View more questions Search