Ask Experts Questions for FREE Help !
Ask
    jjkus's Avatar
    jjkus Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 7, 2013, 02:07 PM
    Harley questions free
    I have a 99 harley Night Train. The guy I bought it off had removed the turn signal module. My rear signals have to be blinked manually and my front ones don't work at all. My question is where do these normally go? I was told they are in front of the rear tire splash guard and is there a decent aftermarket one that will work for my bike?

Check out some similar questions!

Free harley davidson troubleshooting [ 49 Answers ]

All electrical works but hit stater switch then nothing

Harley davidson questions and answers free [ 0 Answers ]

Hello, I have a 1995 evo that's spiting oil out the breather I know that evos are known for marking there spot but this is way worst then that I made the mistake of putting a k&n on the end of the vent tube causing the cone gasget to blow out on top by the lifter blocks ever sense I have been...

Free harley help [ 0 Answers ]

2004 fhhti Bike was stolen and recovered months later. Bike starts runs good. Head and tail lights work. No brake, turn sigs, speedo or tach. I don't have the key or the key fob alarm button. Fuses are good, etc. Could this be something tied to the factory alarm??

Free harley davidson troubleshooting [ 1 Answers ]

My 06Fatboy has been sitting in the garage for months on a battery tender, I tried to start it and all I heard was a chatter sound, sounds like a machine gun when I hold the starter button down. Need help, thanks

Free harley davidson troubleshooting? [ 0 Answers ]

Where is fuse for electric for radio and cd player, is there a inline fuse or just fuses in main fuse box . I have no power to on and off switch for radio/CD player


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.