 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Briggs v twin 22 hp throttle inop
Engine died would not start.. cleaned carb with commercial cleaner and changed plugs now it starts stays at low idle engine misses and stumbles when throttle to fast no increase in rpm. When I press down on carb linkage to front butterflys on carb the engine runs up to full speed but if I let go engine stumbles and throttle does not control rpm. Looks like throttle movement doesn't affect linkage to butterfly valve - will check if linkage broken?
|
||||
Check out some similar questions!
Hi.. I am in the process of changing my single cyl. Briggs 17.5 hp. Ohv engine In my sears 1000 garden tractor 1995-1998.To a Briggs V twin 18 hp.ohv engine 1995-1998 .Everything fits nicely with a little exhaust modification.What I need is the proper way to wire the Briggs V twin engine to the...
Ok. Newbie here. I have looked everywhere before posting and can't figure out. I have an Murray riding mower (Model 36511x18) with a Briggs 11 HP (model 252707-0632-01). Was trying to remove carburetor the other day and the throttle linkages fell off and I don't know how the lower one connects...
I was given a 16hp Vanguard model 303777 that was supposed to have blown up. After a total tear-down, no broken pieces were found, the bores had no sctatches or ring groove. The exhaust and muffler were saturated with oil. I replaced the necessary gaskets, head and others. When the engine was...
I would like to exchange a 19 hp V Twin into a Craftsman lt 2000 mower. It was originally equipped with a 22 hp Intek V OHC. I am wondering how different the wiring is going to be. Also is this possible? The 19 HP twin is Model 42A777 Type 1236 01. The Intek is Model 407777 Type 0174 E1 Thank...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
