Ask Experts Questions for FREE Help !
Ask
    jmgodier's Avatar
    jmgodier Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 2, 2013, 08:43 PM
    After the handle fell off, I found the screw, but I can't get it to fit back together
    I put the screw back into the handle through the black tube and secured it, but it won't seat. It seems like it sits too high.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jun 3, 2013, 07:50 AM
    More details please. Brand and type of faucet? What's it on? Are the threads too big for the screw so it can't be tightened? Is this a screw on top under a pop off cap or a Allen Set Screw in t5he base of the handle? Back to you, Tom
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #3

    Jun 3, 2013, 10:05 AM
    Take a good, clear picture of it and post it for us to see. Back to you. Milo
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tap handle won't screw back in [ 3 Answers ]

Hi, The bathroom hot tap handle came off in my Mum's hand and it only seems to go back into the tap socket so far, so I can't reattach it. Any suggestions?

How to tighten a screw on this faucet handle [ 2 Answers ]

How can I tighten this screw? It's loose and preventing me from being able to rotate the knob and turn the water on and off. I can't pull the handle out enough to get a screwdriver in it and tighten? I'm including a picture to hopefully clarify what I'm asking. (Apologies in advance if I'm not...

My son fell yesterday on his back, he fell on hardwood floor not from big height and [ 5 Answers ]

My son fell yesterday on his back, he fell on hardwood floor not from big height and there doesn't seem to be any external brusing. He is playing and laughing with us but every time we pick him up he cries like it seems to be sore under his arms but he fell on his back so I don't know what to do...

I snapped the tip off the shower handle. Unable to screw new handle. It's a symmons [ 3 Answers ]

I have a symmons shower faucet. While removing the old shower handle I snapped the tip off where you screw the handle on. There is no way to attach the new shower handle. Help

12-gauge wire will not fit in 20A outlet screw terminal [ 10 Answers ]

I have run conduit which came with 3-wire 12 gauge standed cable. I have it going to a 20A outlet, but all of the strands will not fit in the screw terminal. The breaker is a 15A. Can I trim a few of the 12 gauge strands to get the wire to fit onto the screw terminal? Are electrical outlets also...

View more questions Search