 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Coleman Mobile Home Furnace
I have a Coleman Split AC system. It was installed in our Mobile Home in 1980. The indoor Air Handler is: Coleman Presidential 2, Model #3120B750 and Serial # is 128064431. My question is that I have a serious vibration in the house when the unit is running. From what I've been told so far is most probably the Blower Fan in the Air Handler is out of balance or bearings. I'm looking to replace the Fan and possibly the motor but can't match the parts. Can u help with this?
|
||||
|
||||
|
I suggest you contact these folks Coleman Replacement Parts | Mobile Home Parts Store You may have to replace the entire cage since this unit is over 30 years old, I would
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Can my Pilot light be replaced with an electronic ignition? I have a Coleman mobile home furnace, model 7956-856 with a pilot light that is a pain to light. Wondering if it can be replaced with a hot surface ignitor?
Coleman furnace model # 7956A856 , The problem I'm experiencing is that the burners will not ignite. It was working fine this morning came home from work to a cold house. The pilot is still lit,. has current, the thermostat is functioning, as is the limit switch as there is continuity from the...
Hi, My name is Doris and my heater has stopped blowing out heat. I'm trying to fix it myself. It is a Coleman furnace model #3400-590. I have been looking for answers through Colemans site but no luck. How can I tell if its just a switch or the blower has died? Appreciate the help. Hope everyone...
In the summer my air will cut on and run through its cycle then cut off like its should but when it kicks back on the fan out side on the unit will not cut on so I have to turn the switch on the furnace in the hall to off then cool over an over till you hear the out side unit cut on and the coolent...
With the thermostat disconnected, furnace keeps running. With the thermostat connected and turned way down, the heat and blower continue to run. The furnace will continue to run until shut off at the breaker. When the breaker is turned on again, the furnace will come on automatically. What can I do...
View more questions Search
|
