 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Size and gauge for a mtl. Stud box header, 26' span?
A metal stud wall from floor to pan deck of second floor has an opening of 26' wide by 12' tall. The total height of the wall is 18', its 6 inch 20 ga studs 24 OC. What size and gauge should the box header be? I can seem to find a beam span chart that answers this
|
||||
Check out some similar questions!
I would like to know the pendants value 259644 mtl gold bar 999.9
How far can you span a 2 X 12 heade (2. 2' X 12" nailed together with a 1/2" plywood sandwiched between) it will be replacing an interior load bearing wall. Single story house with rafters.
Title: Header to replace a load bearing wall I want to make a header, 2x10, 1/2" plywood, 2x10, 1/2" plywood, 2x10, nailed and glued together to span about 8'where I wish to remove a load bearing wall. Will the header support the weight?
The beam is needed in a 30x40 garage. We are using trusses that are speced to clear span 40 feet but want the extra support in the center.
Hi all, Will be framing for a set of 3 windows installed side-by-side with 3 transom windows above (6 windows total). I'd like to use 1 header over the entire set with single 2x4s between each window. Maybe this is common and perfectly fine, or maybe it changes the way the header is going to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
