Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to remove grout from loose tiles
[ 2 Answers ]
I have a table with a tile top. I left it in the rain and some of the grout dissolved so I took off the tiles and now each one has some grout left on it. I want to clean each tile and then install them on a piece of plywood to make a new table top. 1. How do I remove the old grout? Is there a...
How to you remove cemented toiliet bowl
[ 2 Answers ]
We were going to replace toilet bowl and tank when we discovered that the toilet bowl is seated on cement. How do we remove toilet bowl without breaking it? Thanks.
How do I remove cemented pvc pipe from cast iron hub?
[ 7 Answers ]
Hi, I am doing a bathroom remodel and this includes moving the toilet to the opposite side of the soil stack from where it is now. I have read all about using Fernco donut etc. to install a new PVC pipe into my cast iron hub but the problem I have is that the current PCV pipe that is attached...
Floor Tiles coming out but cannot remove by hand
[ 4 Answers ]
I live in a tropical country wit hot weather almost throiughout the year, Recently after moving in a newly completed condo, some of the floor tiles are "bulging out". Due to the intense heat - expansion They are not cracked , but the sides on corners are "lifted"up but still sticking together...
How to remove paint from basement cinderblock .
[ 1 Answers ]
Last weekend's nor'easter was more than my 75-year-old basement could stand. Water infiltrated through at least two of the original cinderblock foundation walls. Considering how much rain we had, the amount of seepage wasn't extreme (small rivulets flowing from a few places under the sheetrock)... View more questions Search
|