Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Federal pacific stab-loc circuit panel box
[ 2 Answers ]
Bathroom and left bedroom outlets don't work and light in kitchen won't work. The outlets in the kitchen work though. Breaker isant tripped. Gfci outlet test button won't reset. How do you test the wiring on the back of the gfci to see if power is even going to it? Checked each breaker with neon...
Federal Pioneer Stab-Lok BE 132-64 200Amps 120/240V 1 phase 3 wires
[ 6 Answers ]
I have a Federal Pioneer Stab-Lok BE 132-64 200Amps 120/240V 1 phase 3 wires circuit breaker panel with a 30AMP circuit breaker hooked up to an existing electric cooktop. Existing electric cooktop is a Jenn-Air CCS446-C cooktop with the ratings 7,000W at 240V / 208V. Need to hook up a BOSCH...
Could someone stab themselves then remove the knife
[ 2 Answers ]
My friend seemingly stabbed herself in the chest hitting an artery between the heart and lung. Sadly she passed away. She was suffering from postnatel depression and was desperate for help. She was told to come to the hospital at 10.30am. Being desperate she went and was told the bed wasn't ready...
Question about back stab connections for light switches
[ 1 Answers ]
We are in a newly built home and after being there about 2 years we have noticed that some of the light switches have been popping. They are actually 3 switches that control the same light fixture. All 3 are in different boxes. I noticed these switches were installed using the back stabbed method.... View more questions Search
|