Ask Experts Questions for FREE Help !
Ask
    mcuster's Avatar
    mcuster Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 22, 2013, 05:30 AM
    Light fixture stopped working
    I thought the bulb had gone out on my dining area overhead pendant light. Changed the bulb and it still didn't light up. All the electrical appliances around it work. I checked the circuit breakers and nothing was amiss there. The switch is on a double switch with an outdoor light that is fine. What might be the source of the problem? I use this light every day and it just suddenly stopped working. Thanks!
    hfcarson's Avatar
    hfcarson Posts: 1,003, Reputation: 49
    Ultra Member
    		  
    #2

    May 22, 2013, 06:53 AM
    You really need a voltage tester to check the fixture, the switch, etc...
    The answer is likely simple if you have the right tools.
    Resist the urge to guess at the answer, learn to use a tester if you
    Don't already know.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    May 22, 2013, 11:15 AM
    I'm sure you tried a "known" good bulb. I have seen people install new bad bulbs, and not think the bulb could be bad.
    Maybe another bulb, or use a tester as mentioned, and start at the switch.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay ceiling fan light fixture stopped working but fan still works why? [ 14 Answers ]

New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:

Fluorescent light fixture not working [ 2 Answers ]

Only one of the bulbs will light. I got a continuity checker out and found one part of the ballast which does not have continuity. I don't know where I would get a replacement part and don't even know what kind of part it is. I'm guessing since there are two of the same items and one does not...

One socket of light fixture not working [ 3 Answers ]

I have a ceiling fixture with 2 bulb sockets. One of the sockets was not working, I assumed that it was old and needed to be replaced. I purchased a new fixture and wired it the same way as the old one, white to white and black to black. I still have the same issue. One socket is not working. ...

One part of light fixture not working [ 3 Answers ]

I just installed a new lighting fixture to replace an old one. The house was built in the 1990s so the wiring is not too old. The light fixture held two light bulbs and one was not working, so I replaced it. When I put the new one in, the same problem was happening. One light would work, and...

Light Fixture Stopped Working [ 10 Answers ]

Help! Woman with just enough electrical experience to be dangerous here. Halogen ceiling fixture stopped working. No response at all at the switch. Changed bulbs. Not that. Checked switch. Has one white wire on right, two blacks on left. Black top and white always test hot. Black bottom...

View more questions Search