Ask Experts Questions for FREE Help !
Ask
    pencher's Avatar
    pencher Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 19, 2013, 05:54 PM
    Kelvinator dryer
    How do you get the front panel off a kelvinator dryer model DEA500-F2D ?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    May 20, 2013, 05:04 AM
    Pop the top off by inserting a small putty knife in each side of front top to push in clips to release them and then reach down and unscrew screws holding on front.
    pencher's Avatar
    pencher Posts: 2, Reputation: 1
    New Member
    		  
    #3

    May 20, 2013, 06:28 PM
    Quote Originally Posted by drtom4444 View Post
    Pop the top off by inserting a small putty knife in each side of front top to push in clips to release them and then reach down and unscrew screws holding on front.
    pencher-Thanks , it worked
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kelvinator gr6k [ 0 Answers ]

My furnace blows the 3 amp fuse when calling for heat I eliminated all components and it will work with the limit switch jumped it will work with the limit switch connected but not with it attached to the furnace.

How to open Kelvinator dryer? [ 0 Answers ]

I am using Kelvinator dryer.The model No is MER 341ZAS3.the problem is that heat is not coming but the machine is running. I found there is some spark in the heater also.How can I fix this? Please help me

Squeaky Kelvinator [ 0 Answers ]

Hi, lately my Kelvinator dryer has been making a very loud, squeaky noise. I have googled this, and there are many explanations for Frigidaires and other well-known name brands. I don't know if the repairs would be the same for a Kelvinator, and would rather not spend money (and time) if it's not...

Tumble dryer kelvinator ktd 35 drum is "falling" down [ 0 Answers ]

Hi. My dryer made a lot of noise lately. When I open the back, I saw that the axil is getting out from the rear bearing and the drum is falling out of it,when the drum circle counter clock wise. I tried replacing the bearing & his housing with a new one, but still the axil is getting out of the...

Squeeky and Loud Kelvinator Dryer [ 1 Answers ]

I have a 93 kelvinator drier that makes a racket when it runs. I am having trouble getting the back off to look inside. Can you help. Themodel # I think is 131284600 B

View more questions Search