Ask Experts Questions for FREE Help !
Ask
    kimnjohn22's Avatar
    kimnjohn22 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 19, 2013, 05:49 AM
    Blade engagement cable on a Craftsman ltx1000 lawn mower
    I have a craftsman ltx1000 riding lawn mower. We took the deck off to replace the blades and belt and now I have more of the cable that engages the blades then I had to begin with and no tension? I am not finding a diagram on this to see where it may have come loose. Help please.
    aaablerecovery's Avatar
    aaablerecovery Posts: 1, Reputation: 1
    New Member
    		  
    #2

    May 19, 2013, 02:32 PM
    I have the same unit and am dealing with the same issue... turns out I was trying to install the cable keeper into the bracket backwards. The cable swoops around from the rear of the bracket and the hook on the spring goes forward to the bolt in the middle of the pulley directly in front of the bracket then is held on by a keeper spring or cotter pin... hope hope hope I've helped... good luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing drive line cable on Craftsman self-propelled lawn mower [ 0 Answers ]

I just replaced the drive line cable on model 917376070. While doing so a small spring fell out of the bottom of the lawn mower. It is a separate spring, not the one that is part of the cable. I connected the spring to where the drive line cable connects and to the assembly where the drive line...

Craftsman mower stopped moving but blade engagement still works and mower starts [ 7 Answers ]

Can someone help me determine why my craftsman kohler engine 16hp manuel transmission riding lawnmower stopped being able to move but still is able to turn on/off and engage the mower blade? I have checked the clutch but it appears to work since the mower is able to be turned on/off. All of the...

Attaching 48 in snow blade to craftsman lawn mower [ 1 Answers ]

Where can I find instructions for attaching a craftsman 48 in snow blade to a craftsman lawnmower?

Cable snapped on blade engage Craftsman Mower [ 1 Answers ]

The cable that is attached to the engaging knob has rusted and snapped so now I can't engage the blade. What do I do? Easy repair or headache?

Sears Craftsman Riding Lawn Mower Blade adjustment [ 1 Answers ]

My Sears Craftsman 42" cut riding lawnmower has 2 blade decks. With the height adjustment lever in the highest position (or in any position), the left blade/deck cuts lower than the right. How do I adjust the left blade deck/blade to a higher position?l

View more questions Search