Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What size laminated beam do I need to span 20' for my basement beam?
[ 8 Answers ]
I have a one story ranch and want to eliminate the columns in a section of my basement. The beam will need to support the 2x8 floor joists which are 12' 6" from column to wall. What size beam will I need?
What size of beam do I use?
[ 0 Answers ]
Hi I am replacing a deck, and I am not sure what size of beam to use. The piers are ten feet apart and the deck height is twenty inches at top of joists. I was going to use 2 x 10 joist with three laminated 2 x 10s for the beam, giving me only inch and half under the beam. Can I use 3 laminated 2...
I or H beam size
[ 9 Answers ]
I am wishing to make a deer pole, It will be on my barn and it will need to support approx. 500-750 pounds.The deer are large here! No but the overkill is for safety and a trolley type of lift I will be attaching to this beam.This beam will be cantilevered from the end wall a full 8 foot.My truss...
Beam sizing and spans
[ 2 Answers ]
I would like to open up the dining/living room area in my 1 story ranch. I would like to install a 3.5" x 12" laminated beam spanning 20'(BEAM #1). BEAM #1 supports the roof trusses at 24" on center. This beam will be supported at one end by the wall and at the other end will tie perpendicularly...
Size of beam
[ 2 Answers ]
How big a beam do I need for a span of 12 feet, for a patio roof? View more questions Search
|