Ask Experts Questions for FREE Help !
Ask
    barbliss61's Avatar
    barbliss61 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 12, 2013, 07:29 PM
    Enviroplus90 furnace
    My fan keeps running and the thermostat keeps showing that ac is on but the thermostat is shut off can't get any heat

Check out some similar questions!

Enviroplus90 rpj2 [ 1 Answers ]

The top part of the furnace turns on but the bottom (Fan blower) does not come on. There is a power switch on the side ON/OFF switch and a safety button that depresses on the bottom when you place the fan cover on. This triggers the unit to come on. That said, the fan never comes on at all. I...

Tran furnace / air main blower on furnace will not run. But the a/c unit runs [ 0 Answers ]

Main blower on furnace, is not running, when thermostat calls for cooling the out side unit runs. The main blower on the furnace in not

Furnace burners ignite but won't stay lit on my trane xe78 furnace? [ 0 Answers ]

I have a Trane XE78 furnace and the flames come on for about 5-10 seconds and then shut off. They re-ignite about 10 seconds later, then shut off 5-10 seconds after the 2nd ignition. I believe they flame on one more time, shut off and then never re-ignite and the blower just runs and runs with...

Intertherm furnace e2eb-017hb runs briefly, shuts off, then furnace just clicks [ 3 Answers ]

I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.