[DivineKaos]

Hello All,

I have a ceiling light/fan that is not working properly.

These are the wires available;

Fan: Blue, White, Black, Green
Ceiling: White, White, Black, Black, Red
Switch: Black, Red (Two blacks wire-nutted together, two whites wire-nutted together behind the switch)

I currently have it setup as:

Blue to red
Blacks together
Whites together
Green to box

Like this, the switch operates the light, but the fan does not work.

Any ideas?

Thanks!

[hkstroud]

Connect the two whites from the ceiling and the white of the fan/light together.

Connect the two blacks from the ceiling and the black from the fan/light together.

Connect the red from the ceiling to the blue from the fan/light.

The wall switch will control the light. Pull chain will control the fan.