 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Pluming help
I have a well, when the water is not running the pump pressure is at 55psi but when I run the water to water the garden out side the pressure drops to 20 psi and hardly any water comes out the hose ( there are no kinks in the hose and no filters atached to the out side water suply
|
||||
|
||||
|
Check the air valve on top of the bladder tank. If air comes out turn the pump off and open a cold water valve to bleed off the pressure. Now recharge the tank to 2PSI UNDER the cut in point on the control box, If water squirts out of the air valve replace the tank, Good luck, Tom
|
||||
Not your question?
Ask your question
View similar questions
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Pluming drain
[ 8 Answers ]
Hi, I have a major problem, when removing the screws from cover plate on tub overflow, broke one screw and stopped, How can the screw be removed??
Pluming basment
[ 6 Answers ]
I'm going to be putting a full apt in we have a septic tank can I hook toilet and water into same drain system
Shower pluming
[ 1 Answers ]
Plumbing-shower-When I turn the hot or cold valves only small drips come out?:( :(
Pluming
[ 2 Answers ]
How do you bleed or prime a well pump. Pluming
Pluming - Bathroom
[ 1 Answers ]
I would like to install a bathroom upstairs. However, I do not have easy access to any 3 inch drain pipe for my toilet. I would need to travel 25 feet or so laterally, but probably wouldn't have enough drop to complete the task. I could, however, get to a 2 in drain pipe directly below my new...
View more questions Search
|
