 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Can I clean the hole in a auto water temperature sending unit
Can I clean the little hole in a water tempeture sending unit... 1994 chevy van... 350 engine ? Tks richard
|
||||
|
|
|
||||
|
Not sure what hole you're talking about. If there is a hole in the sending unit itself and it is clogged, you are much better off spending the few bucks to replace it.
|
||||
|
|
| Question Tools | Search this Question |
Check out some similar questions!
What is the temperature of the singularity within a black hole
I live in a condo where the hot water heater serves 30 units. One of our unit owners told us that the current water temperature, which is 140 degrees, is much too hot and ahould be reset to 120 dagrees. How would this affect hot hot water supply? Will we run out of hot water?
a plumber cut a 2 x 4' access clean out in a 3.5' iron roof drain pipe. The pipe is in the corner of a basement kitchen. He covered it with some duct tape. I did a fiberglass tape repair but looking for a more permanent fix. I have used what I call a saddle clamp (metal plate with a tie bracket...
Just replace head gasket and now temp gauge doesn't seem to be working, have checked fuses? Where is the sending unit located? Maybe we didn't reconnect it.
I have a 72 gmc pickup truck,and I can't locate the wire that goes to the fuel gauge and connects to the sending unit ,can anyone out there help me with this problem Thank you
View more questions Search
|
