 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Harley davidson twin cam crankcase breather
On twin can breathing now theoretcly can u run hose from vent on oil tank to the ground in wanted while where that line use to connect to engine just pulled in clean air through a filter then out breather kit. Basically can we eliminate dirty air from oil tank?
|
||||
Check out some similar questions!
I have a 2002 heritage softail fuel injected that is hard to start. Take four tries or so to get started. Once it started it idles fine but when 25-35mph is reached it cuts out and then picks right back up. Does it also around 55mph and goes away once higher speeds are reached. Problem does not...
Hard vibration when slowing or at about 40 when not under torque greatly reduced when I pull in on clutch.
Harley Road King with EFI. Riding along fine when the green EFI light comes on and the engine drops to a fast idle and will not respond when I attempt to give it gas. I come to a stop , shut it off, wait a few minutes and restart it. Revs up, works fine until the next time it happens again. ...
16 hp briggs and stratton engine pushing oil into crankcase breather tube. The engine is in a Cub Cadet 582 and the oil collects in the air cleaner pan. The oil level is correct. Any idea what might be wrong? Thanks in advance for your help.
I have a 1973 H.D. XLH Sportster. Just got it back on the road after a 6 year hiatus. However, I noticed there is excessive oil coming from the crankcase breather tube. Flowing/running out onto the street. Any ideas out there why this is happening?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
