Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Venting a Toilet
[ 4 Answers ]
Running a 4" ABS. Upstream about 5' will be a 4X4X2 Wye for the tub with it's own vent, plus another 4X4X2 Wye for the washer with it's own vent. The main's stack vent will be about 6' downstream. I believe that meets code since there are 2 vents upstream of the toilet, am I right? Also, is...
Leaking toilet - need new closet flange?
[ 3 Answers ]
My father-in-law (a fairly skilled, but sometimes lazy :confused: , handyman) installed a toilet in a house we are rehabbing. It has always leaked at the front of the base since being installed. It only seems to leak after someone has sat on it and then flushed - I haven't noticed it leak when just...
Upflush toilet venting
[ 2 Answers ]
I am in the process of finishing my basement and decided to use a Saniflo Saniplus macerating pump unit for lifting wastewater from a sink, toilet, and shower into the existing 4 " drain line (the 4" drain exits the basement approximately 4' from the basement floor). The force main is the easy...
Question about toilet venting
[ 9 Answers ]
Hello all! I stumbled upon this forum... what a godsend! Anyway, here's a question for the plumbing experts. I have two bathrooms, each with one toilet and one sink. All four of these items are vented through a single 2" pipe up to the roof. I've been having a bit of trouble with the...
Toilet/Shower - Venting
[ 1 Answers ]
I am remodeling 2 bathrooms into one. I am moving a few things around, but my question is. I had a 3" vent that went up a wall in between the 2 bathrooms, well I had to do away with it. It was at the end of the line of the rough in and 2 toilets were connected right near it. My question, there... View more questions Search
|