Non working outlets

rental1111 Posts: 1, Reputation: 1

New Member

May 5, 2013, 10:43 AM

Non working outlets

Some of my plugs don't work. I tested them and the tester buzz's in both holes?

stanfortyman Posts: 5,598, Reputation: 279

Electrical & Lighting Expert

May 5, 2013, 01:04 PM

Did you have a question?

Add your answer here.

Check out some similar questions!

Outlets not working [ 2 Answers ]

I have an outlet in my kitchen that does not work. One side has a GFCI and the other side a switch. The switch works not the GFCI does not. I tried to replace it and it still does not work. One side of my kitchen outlets does not work, but the other side does. I tested the others and there fine. I...

Outlets not working [ 2 Answers ]

Hi There, I just moved in to an older home and my outlets are not working however, nothing is tripped on the breaker. I tried resetting both outlets in the kitchen and still nothing. I am a single girl who is afraid of getting ripped off by someone; I KNOW NOTHING IN THIS AREA!! Can you tell me...

Outlets Not Working [ 21 Answers ]

I have been checking other posts about outlets not working but I still don't know what to do. During an Ice Storm this past weekend, my Christmas lights went out. I have the lights plugged into a power strip that is then plugged into an outlet outside. During the storm half the lights went out and...

Previously working electrical outlets stopped working [ 2 Answers ]

Hi Everyone A wall of electrical outlets in my kitchen just stopped working. They were working just fine about a month ago. I tried checking the circuit box, and turning the circuits on/off just to make sure anything that has been tripped was turned on back again. But it didn't work for the...

Outlets not working [ 3 Answers ]

Long Story... The other day, my husband and I installed a ceiling fan in our master bedroom. Everything went fine and the light and fan both work. Then we went to install a dual switch, that has a light dimmer and fan control, on the wall. When we turned on the power and moved the levers on the...