Ask Experts Questions for FREE Help !
Ask
    BrendaPayne's Avatar
    BrendaPayne Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 3, 2013, 04:02 PM
    Kenmore Dryer 90 series
    Where is the thermal fuse
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    May 4, 2013, 05:20 AM
    You have to look for it by completely tearing down the dryer. It is placed so that you have to remove everything, so you will clean it, but after removing the drum you will find it close to elements. It's round mounted in an oval piece of sheet metal with two wires. There are several of these and you will need to test them with an ohm meter going from one to the other as you follow the wires. They are wired in series, so when you find one just move through all of them. Make sure to remove the sheet metal ductwork and wash out the different parts that move air, including the blower which is very important. Make sure to replace the belt and grease all bearings with high-temp lithium grease (white and at all auto parts and appliance stores). Look at these: https://dl.dropboxusercontent.com/u/...l%20Dryers.zip
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dryer 80 series? [ 1 Answers ]

I have a Kenmore dryer 80 series that runs for 2 to 3 min then blows my breaker,I checked the element its OK

What is the capacity of my Kenmore 80 Series Washer & 90 Series Dryer? [ 1 Answers ]

We are trying to figure out what the capacity is of our Kenmore Washer and Dryer that we purchased over 10 years ago in Canada. I can't find it anywhere on the machine or manual. The Model # of the Kenmore 80 Series Super Capacity Plus Washer is 110.4784292, Serial #CH0802766. The model # of the...

Kenmore series 80 dryer timer keeps dryer running through cycles [ 2 Answers ]

Our 5 year old series 80 kenmore dryer keeps running through all timer cycles. You have to leave door open or pull the plug to stop it. Is this a major repair or part cost?

Kenmore Dryer 90 series [ 2 Answers ]

Hi all, I have little experience with trouble shooting appliances so my first question is going to be kind of silly to those that have even a little experience. I have a Kenmore 90 series @ 10 years old and it isn't heating. Everything else seems to be working properly. At first I assumed it...

View more questions Search