 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Linking Honeywell Chronotherm Plus IV to AC unit
I have a Chronotherm IV being used wirelessly to control one of two furnaces and one of two AC units which control the upstairs temp. With the warmer weather, I turned this thermostat to cool but it did not turn on the AC unit outside. I changed the batteries and checked power at the power disconnect located outside by the AC unit. The thermostat does not seem to be linked to the AC unit. Is there a way to reset the link?
|
||||
Check out some similar questions!
If the AC does not kick in, could it be a thermostat problem? I ask because even when the System is set to 'Off' and the fan is set to 'On' the AC unit is not kicking in. Thanks.
Hello, I have 5 wires coming out of my wall, red yellow blue green and white, this thermoostat has every color I need except it seems to power this thermostat I need the C hooked up to something... can you tell me what I need to hook up to the "C" I have no other wires
I can't get the heat setting above 70 degrees.
How do I reset the filter reset button for Honeywell Chronotherm IV plus?
Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
