 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Why is my psi so high
I started vacuuming my pool this morning, water was clear but after awhile the pump seemed like it was getting dirty so I stopped vacuuming. I found a (don't know what it is called)knob type thing that goes in where the inflow comes in, I put that on backwashed my pool and shocked it again but the psi is really high now and the water is green. Help
|
||||
Check out some similar questions!
We are looking at a HUD home and when the water pressure was tested, it went from 40 psi-0 psi in 20 minutes. They are requiring $500 go into an escrow account to have it fixed, but since we are prewarned there is a problem, we cannot back out if it turns out to cost more(without losing our earnest...
My well will not build over 40 -42 psi I checked the air in the tank and it reads 40 psi my pressure switch is a 40 - 60 and the pump runs constantly
I have several related problems concerning my water. Pressure tank is at 45 PSI Water Pump only builds pressure to 20PSI. Only air is flowing when I turn on a faucet. The pump does not turn off at 20psi. But it does not build past 20PSI. Small house. 1 Kitchen Sink, 1 Bathroom Sink, 1...
The pipe leading from my pump motor to water filter busted over the weekend. I fixed that but my tank is still not pumping water. I noticed that the factory precharge PSI listed on the tank is 38 and that my gauge shows the PSI is around 5. I believe this is the reason for no water being pumped....
I have a second home that gets its water from the lake that we pump the water from. There is a gauge on the pump and I think is has changed from years past. What should it read? Now the pump shuts off at approx. 40 psi. I don't think it went that high in the past. Thanks for you help.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
