Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to remove a american standard 3 handle shower faucet
[ 1 Answers ]
I have a two handle american standard shower faucet that is from the late 60's. I replaced the valve on the hot side, but still have a drip. Two weeks later the hot water stopped coming out. With the stem removed from the wall, I can see a part in the wall that moves like a bearing, is this the...
American Standard single handle kitchen faucet
[ 3 Answers ]
I have a leaky single handle kitch faucet by American Standard. I have managed to get the handle and the cover off but can't see the source of the leak. I can see it is not a ball or ceramic plate faucet so I assume it is a cartridge and that is what I am looking at (the cartridge), however I...
Removing american standard shower faucet?
[ 3 Answers ]
I have a very old (>15 years) american standard shower rotary control with temperature readout. Must remove and replace. Cannot remove handle. Set screw hidden. Need instrutions.
1966 American Standard shower faucet replacement parts
[ 2 Answers ]
Have a shower faucet (American Standard) in house built in 1966. Hot and cold water do not mix properly. Trying to find parts or replacement as a new fixture would require replumbing the pipes. Any ideas?
Low hot water pressure in bathtub of american standard faucet
[ 5 Answers ]
I have a American Standard single handle faucet in my bathtub, the cold water in both the shower and tub is fine. The hot water pressure in both the shower and tub is very low. Is there anything I can do on my own to get more pressure in the hot water. Thanks RH View more questions Search
|