Ask Experts Questions for FREE Help !
Ask
    Funch's Avatar
    Funch Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 22, 2013, 05:16 AM
    Starter on craftsman mower will not engage
    How can I check the starter onto craftsman mower
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Apr 22, 2013, 06:09 AM
    Check it for what?

    Check it if its bad? Set of jumper cables... are you sure your battery is any good? AND fully charged?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    Apr 28, 2013, 01:15 PM
    Hi,
    If it spins and that is all, most likely you have the battery hooked up backwards, or the pinion is stripped.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman mower will not engage [ 4 Answers ]

Can someone tell me if the electric cluch turns with the mower deck off. My mower sears tractor stopped engageing replace the electric cluch with new one and before I remount the mower I would like to know if the cluch will work.\Thanks

Craftsman mower won't engage blades [ 1 Answers ]

When I pull the pto switch to engage the blade the engine will shut down.blades turn freely by hand. Acts as if there is safety switch grounding out. Seat switch still works but can't figure it out.

Craftsman rear engine mower,runs fine,mower deck will not engage or cut the grass? [ 2 Answers ]

Rear engine craftsman mower runs fine,but the mower deck does not engage when you lower the lever?it appears the belt is on the pulleys,help...

Solenoid clicks, does not engage starter. Hot wired mower started. Would not shutdown [ 3 Answers ]

Solenoid would click, but starter would not engage. I hot wired it and it would start, but would not shut down with the ignition key. Once engine was killed, would not start with hot wire or ignition switch. Solenoid will not click now. I changed solenoid but still no response. How can I verify...

19 year old john deere 12 hp riding mower, starter does not engage [ 1 Answers ]

I have a 19 year old john dedere 12 hp 38" cut mower. When you turn the key on, the starter clicks and the drive teeth hit the botom of the flywheel ring gear. If you turn the flywheel just a fraction it will engage or if you keep clicking the starter it will eventually engage. What's wrong, I...

View more questions Search