Ask Experts Questions for FREE Help !
Ask
    buddyh's Avatar
    buddyh Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 21, 2013, 06:25 PM
    How to set timming 18.5 briggs
    How do I set cam timming on 18.5 briggs
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Apr 28, 2013, 01:13 PM
    Hi,
    There are marks on the crank gear and the cam gear. One clue is they do not ask you to assemble with the valve springs under tension.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

25 hp Briggs stays same rpms no matter where throttle is set. [ 1 Answers ]

This has been a learning process for me and will be a lengthy post, so bear with me as I explain what I have done and what is happening. :) Bought a mower that was smoking really bad. Turns out the sump gasket was leaking onto the exhaust. The motor is a 25 hp Briggs V Twin Intek model number...

How do you set the timing on a 18.5 hp briggs and stratton [ 1 Answers ]

Won't run it had a bent push rod and we changed the whole head now when I hit the key the fly wheel just spends I think the timing is off and I'm not sure how to go about setting it should I take the engine off and then go from the bottom to get to the timing chain or go in through the head? I...

Choke linkage for 16hp briggs same set up? [ 0 Answers ]

How to attach the choke linkage? Model #311777-0143-e1

How do you set the balancer shafts on a briggs and stratton 11 horse engine [ 1 Answers ]

Horizontal shaft b.n.s 11 horse engine has two balancer shafts connected to the outer case.. how do I set them when I put the cover back on...

10hp briggs straton set for 2yrs and won't fire [ 3 Answers ]

Have a generater with 10hp briggs straton engine has set for 2yrs will not fire cleand and set magneto still no spark

View more questions Search