Ask Experts Questions for FREE Help !
Ask
    Outlaw13A's Avatar
    Outlaw13A Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 19, 2013, 09:18 AM
    Troy-built bronco wiring diagram
    I have a Troy-Built Bronco Riding Lawn Mower, Model # 13AV60KG011, SR.# IE308H20019. I can not get it to start, even make a noise 99 % of the time, it will try to start ever now and then. I check and see that there is no voltage to the started switch, don't know how the current is distributed to the solenoid or the safety switches. Does someone have a wiring diagram for the mower or where can I get one ? Thanks
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Apr 28, 2013, 11:38 AM
    Hi,
    The battery voltage will generally take on of two paths. It will go directly to the key switch and leave it on the start trigger circuit going through the brake and PTO(deck) switches to reach the solenoid. The other choice is to have it go through those two switches to reach the key switch, rare though it may be. Some systems even involve the ground, though that should not be yours. Do not forget that there is a fuse in there.
    To get your parts breakdown, follow this link and click on the I Accept button for a download:
    http://www.troybilt.com/webapp/wcs/s....pdf&htmlLink=
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Electrical wiring diagram for a Troy Built 42" Bronco riding mower [ 8 Answers ]

Just a quick question.

Wiring diagram troy bilt bronco riding mower [ 3 Answers ]

I need to see how to wire the safety interlocks.

Troy bilt super BRONCO wiring diagram? [ 1 Answers ]

Where can I get a wiring diagram for a 2006 model super bronco troybilt mower?

Troy Built Bronco 42" [ 1 Answers ]

I have been experiencing my stearing getting sloppy for a while now. I looked at the stearing shaft and it seems tight but noticed that the shaft seems to be missing a bearing at the lower end or the bearing is shot... I was looking at the lower end of the stearing shaft, and it engauges the gear...

Wiring diagram for Troy Built Tractor LTX 1842 [ 1 Answers ]

Where can I find a wiring diagram on a Troy Built Lawn tractor, model LTX 1842??

View more questions Search