Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Toilet flush: When I flush the toilet the water does not wash all around the bowl.
[ 10 Answers ]
Toilet flush: When I flush the toilet the water does not wash all around the bowl. There is always a section at the front that doesn't get washed. I have tried pushing the end of a wire coat hanger around the rim, and I have used copious amounts of cleaner. Does anyone have any suggestions?
When ever my neighbour uses his toilet flush, my toilet bowl overflows?
[ 2 Answers ]
I am living in the ground floor of an apartment and whenever my neighbor or the man in the first floor of the apartment use their toilet flush the water from my toilet basin overflows . Why is this happening and how could I avoid this.please help me
After I flush my toilet the water level in the toilet bowl itself is always very low.
[ 2 Answers ]
After I flush my toilet the water level in the toilet bowl itself is always very low. How can I fix this issue. Thanks!
Toilet bowl flush issues
[ 1 Answers ]
Occasionally lowest toilet in the house will double flush with a single press of the handle. It will release the water from the tank into the bowl, which then swirls down the drain and the e bowl refills. At this point normally the bowl is full and the tank refills. On occasion, the bowl will...
Toilet flush in the bowl is weak
[ 9 Answers ]
When I flush my toilet the bowl pressure is pretty weak, and doesn't always clear the bowl completely. We often get pieces of paper that come back into the bowl. The tank and bowl was cleaned out completely before I re-installed it. I also installed a new flush valve system. Still the weak flush. ... View more questions Search
|