Ask Experts Questions for FREE Help !
Ask
    KEC's Avatar
    KEC Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 13, 2013, 07:30 PM
    What size header beam will I need?
    I am wanting to remove 9.5' of a 11.5' 2x4 wall on our first floor separating the kitchen from the dining room. The wal is load bearing, the 2x12 joist are spliced(run past wall 6" each side) I can put the one end on the exterior wall with a 4x4 down to foundation, and the other right on a beam( that's why I'm leaving the 2' piece. It's a bedroom above. Could I double up a 2x10with 1/2" ply between for that distance?
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Apr 14, 2013, 01:53 AM
    The size and type of beam would have to be approved by the building dept in your area. They will probably want a drawing by a certified architect or construction engineer.

    Both sides of new girder have to be supported down to the foundation or a footing. A floor beam is not strong enough to support girder and may break from the extra weight.

    Chuck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What size laminated beam do I need to span 20' for my basement beam? [ 8 Answers ]

I have a one story ranch and want to eliminate the columns in a section of my basement. The beam will need to support the 2x8 floor joists which are 12' 6" from column to wall. What size beam will I need?

Header size [ 1 Answers ]

does anyone know what the universal code is for a 16ft garage door header on a gable end, so not load berring, do two 2X12's work or do you have to use lam beams thanks, I live in North Dakota

What size lam beam header is needed to clear span a 30 feet? [ 2 Answers ]

The beam is needed in a 30x40 garage. We are using trusses that are speced to clear span 40 feet but want the extra support in the center.

Header size [ 3 Answers ]

I live in a one story rancher in New Jersey. I am looking to replace my front window with a bay window. Currently the front window is two double hung totaling 55 inches wide. There is a double 2x6 as a header now. The bay window is 84 inches wide. Can I use a double 2x8 or does it have to be...

Laminated beam as header [ 1 Answers ]

What size laminated beam should I use for a 15 ft. span supporting the back wall of a house as well as an extension with a shed roof thank you

View more questions Search