Pressure switch for well pump

hjd1963 Posts: 1, Reputation: 1

New Member

Apr 12, 2013, 06:18 AM

Pressure switch for well pump

How do you adjust the pressure switch, for a well system

creahands Posts: 2,854, Reputation: 195

Ultra Member

Apr 12, 2013, 10:43 AM

What adjustment do you want to do?

Chuck

Add your answer here.

Check out some similar questions!

Pump pressure switch [ 6 Answers ]

How do I adjust the pressure switch on a small water well pump, there are two adjustment screws one is larger than the other. Many thanks, M. Ruen

Well pump pressure switch [ 1 Answers ]

I have a new submersable 110vt. Well pump installed and wired correctly. Unfortunately, the pressure gauge will suddenly fall to zero woth no water pressure. Have checked all power to switch and fuses. No problem. But you can hear the pump come on for about 3 seconds then quit about every ten...

Pump pressure switch does not turn on with low pressure [ 0 Answers ]

I lost water in my home overnight. The pressure gage reads about 8 PSI. If I use the lever on the pressure switch to close the contacts, nothing happens. Actually, the pump controller box, makes a buzzing sound for a couple of seconds, but that's it. Does anyone have any thoughts? I don't...

Well pump pressure switch [ 1 Answers ]

Manostat pressure switch ,has 4 screws on front for wires( 2 black wires and 2 white wires)and then two ground wires .These are all the wires coming in for switch . My friend took them off and does not remember how they were hooked up. Please help if you can.Thanks.