Ask Experts Questions for FREE Help !
Ask
    onuoha's Avatar
    onuoha Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 10, 2013, 01:30 PM
    Plumbing design
    Help me with a toilet, bath drain and a hand wash drain plumbing diagram for a room dawn and two bedroom top, duplex.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Apr 10, 2013, 03:30 PM
    Hi onuoha. Can you show us a diagram of how you would like the fixtures laid out. If so, we can tell you the correct way to drain, waste and vent it.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Apr 10, 2013, 03:42 PM
    Here's a typical drainage lay out. More questions? Just ask. Good luck, Tom
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Moving Bathroom – Waste Plumbing Design – Venting Correct? [ 13 Answers ]

I am moving our bathroom from one end of the lower level (concrete slab) of our 4 level split to the end that is closer to the stairway to the levels. The lowest level is the basement. I will be able to tie into the existing 4” drain line and the 2” vent that runs up through the higher level to...

Question on DWV Plumbing Design [ 9 Answers ]

I am trying to design the plumbing for a new, upstairs bathroom. My main concern is how the toilet is vented (behind the toilet and upstream from the horizontal drain). I haven't found anything in the vent section of the IPC that prevents it, but just have not seen any examples of anyone doing this...

I have heard that contextual design is a great design methodology. However, I am al [ 0 Answers ]

I have heard that contextual design is a great design methodology. However, I am also hearing discussion of design thinking. Are these design methodologies different or similar. Any thoughts are appreciated.

Plumbing design to building plan [ 1 Answers ]

Building plan to plumbing design &this plan add to all santry fittings

Plastic Product design, Mold design, Plastics, [ 2 Answers ]

What are all the precautions needs to be taken during Nylon molding?

View more questions Search