[rn4life2002]

I disconnected my dish receiver to paint my daughters room and now when I reconnected the cables. The satellite in her room came back on good right wrong
Now my satellite on tv2 will not work. Nothing has been changed on tv2 still on channel 60. Just shows black screen with fuzzy sound. Im pretty sure I hooked it up wrong its been 3 months and a lot of Google research but no solution I can't even find a diagram I should add that tv1 is an older TV. It has 1 plug in on the back and the red, white and yellow ports on the front of the TV any help would be greatly appreciated. Thanks in advance for your time,

[trevin8273]

I know I may not be of much help but you want to either call the Dish company or buy a new TV... or you could not watch TV like me (✌ﾟ∀ﾟ)☞

[Stratmando]

Is this a 2 tuner receiver?

[Stratmando]

Try here:
Scroll down to page 8 and 15 I believe, also read on the diplexers. The UHF is what goes to second TV:
https://docs.google.com/viewer?a=v&p...NDFhOTVhZGU1MA

On page 8, Ignore the 4 way splitter, this goes to your second TV.
Good Luck

[rn4life2002]

Thanks so much I will try this stratmando, and if it doesn't work I'm going with treven8373 oh and yes it's a 2 tuner receiver. Again thans so much will let you know if I get I going