Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Troubleshooting hot water cutting off on grohe shower mixer valves
[ 1 Answers ]
I have grohe shower faucets and my bath.. I am having problems with the hot water cutting off when I take a shower.. could it be the shower mixer valves or could the temp. be set to high. I turned it down some but it still cuts off after a certain amount of time. I need some suggestions on what I...
Do we tile all of the shower walls even around the shower pipes then shower handle on
[ 4 Answers ]
We are tiling around the tub do we tile all 3 walls then put shower handle and tub spout on walls or do we put tub handle on wall then tile around it?
Moen shower valve troubleshooting
[ 7 Answers ]
I have two showers with the same trouble. After a few minutes the water gradually gets colder so you have to keep turning left to get hotter water. I changed both stems but still have the same trouble.
Troubleshooting drain problems on a shower stall
[ 1 Answers ]
I have a fiberglass shoer stall that leaks water from under the stall but it only leaks when someone is in the shower it does not leak if you turn on the shower and stand outside, Oh it is installed on a raised platform on top of concrete. Thanks John
My shower drain is raised above the shower pan by 3/16" causing standing water
[ 2 Answers ]
I have a fiberglass shower stall where the bottom has either slumped or the stall was installed wrong to begin with (it has no support beneath the surface that I stand on). The drain sticks above the level line so I have about 3/16" of standing water. I cannot easily access the bottom from the... View more questions Search
|